short knit dress Whistles Annie Sparkle Sweater Black Size 16 Model is wearing a size SmallModel’s Profile Short Sleeve Knit Dress with

Description

Specialist clean

As you may remember from my previous post, this was the dresser as she started out: Tools You Will Need: Chisel Mallet Circular saw Measuring tape Pocket hole jig Hammer (or cordless brad nailer) Cordless drill Level 1/16 Drill bit Wood clamps Supplies You Will Need: -1/2 plywood (I used a 1/4 sheet for all 3 drawers that is 2 x 4) 1 pocket hole screws (8 for each drawer) 1 nails 24 scrap to cut wood shims -Ball-bearing metal drawer slides (buy the length as the depth of the drawers 12 long ones are found at WoodCraft and Amazon) -13 boards cut to drawer depth (I used about 6 on this dresser) -1 wood screws (for attaching to drawer face) -1 1/2 wood screws (for attaching 1x3s to side of dresser) Step 1: Remove Old Drawer Slides Using a chisel and mallet remove the old wooden drawer slides from the inside of the dresser

With a relaxed fit, pockets, and button-up front, it's perfect solo or layered with your favorite boho accessories

Body-sculpting bandage and hand-braided cutout details define the Remi Gown, new for Spring '25. The full-length gown has a subtle sweetheart neckline with pin-thin straps and is finished with a back slit and center-back zip